Autodesk Revit Inventor Workflow – Part 1

Autodesk Revit Inventor Workflow – Part 1

Inventor to Revit – ‘Give Me That Chair’

So I briefly outlined the workflow in my last blog to define exactly how we would bring an Inventor model into Revit using the BIM workflow.

Let’s get into the nitty gritty of it.

Once you have created your part (look at this nice chair)

Inventor-model-to-Revit-300x266 Autodesk Revit Inventor  Workflow - Part 1

You can then activate the BIM tab to see what options we have available to us.

Inventor-BIM-tab Autodesk Revit Inventor  Workflow - Part 1

We have BIM Ready Content and Simplify.

Check Revit Features – this does a quick analysis on the part and will tell us whether any of these features will be able to go into Revit immediately without too much hassle.

Inventor-BIM-feature-check-report Autodesk Revit Inventor  Workflow - Part 1

As you can see we are going to have some issues with this. It does not like fillets.

So to simplify it we can use 1 of 3 options.

  1. Remove Details – This simplifies the model by removing fillet, chamfers or custom selected faces.
  2. Fill Voids – This caps any holes and pockets with surface patches to fill model voids.
  3. Define Envelopes – Simplifies the model with simple box/cylinder extrusions.

Simplify-inventor-model-1-300x241 Autodesk Revit Inventor  Workflow - Part 1 Simplify-inventor-model-2-300x219 Autodesk Revit Inventor  Workflow - Part 1Using option 1 Remove Details I have selected the faces of the fillet and it removes that detail for me.

After running the feature check report it is still giving me errors but I am going to run the rocognise revit features anyway as I know this should work.

Inventor-BIM-feature-check-report-1 Autodesk Revit Inventor  Workflow - Part 1 Simplify-inventor-model-3 Autodesk Revit Inventor  Workflow - Part 1

I am going to use the Auto Recognize feature. This will recognize all features that are compatible with Revit as well as deleting any fillets or chamfers.

SUCCESS!!

Inventor-Auto-Recognize-Feature Autodesk Revit Inventor  Workflow - Part 1

I hit the finish recognize button and go onto the next step. BIM Exchange.

Inventor-BIM-Exchange Autodesk Revit Inventor  Workflow - Part 1

Here you have some more tools that will tell Revit what type of component you are exporting.

For your MEP author it is important as you would like the correct connection when using this Inventor assembly or part in Revit.

Your UCS helps the Inventor model to be the right way up in Revit.

UCS-Inventor-Model Autodesk Revit Inventor  Workflow - Part 1

Inventor-model-to-Revit-design-check Autodesk Revit Inventor  Workflow - Part 1

Let’s check the design. Looks good to me.

Inventor-model-to-Revit-design-check-2 Autodesk Revit Inventor  Workflow - Part 1

Let’s Check the Revit Features. Fantastic!!

Check-Revit-Features Autodesk Revit Inventor  Workflow - Part 1

Now we can head off and export the model to Revit. Click on the Export the Building components.

Export-Building-components-from-Inventor-to-Revit Autodesk Revit Inventor  Workflow - Part 1

File Type – You can select either .rfa or .adsk

Component Type – You can select what type of classification you want for this component.

component-type-1-300x192 Autodesk Revit Inventor  Workflow - Part 1component-type-2 Autodesk Revit Inventor  Workflow - Part 1

I will choose a chair.

You can also export the properties from Inventor into Revit.

component-properties Autodesk Revit Inventor  Workflow - Part 1

Okay after all that lets export the file.

Export-Building-components-from-Inventor-to-Revit-2 Autodesk Revit Inventor  Workflow - Part 1

Below you can see the Translation Report. Everything is a success and at the bottom you can see what parameters have been exported successfully as well.

Autodesk Revit Inventor Translation Report 21 April 2015 03:26:29 PM

 

Source File: C:\Users\aldred.MICROGRAPHICS\Documents\Stefan antoni\BIM exchange.ipt
Target File: C:\Users\aldred.MICROGRAPHICS\Documents\Stefan antoni\BIM exchange.rfa
Translation Type: Revit Family File Sending System: Inventor 2015 SP1 (Build 190203100, 203)
Author: Aldred Boyd Translation Time: 00:00:47

Overall Results

Element Type Success Warning Failure
Features 5 0 0
Connectors 0 0 0

Configuration

Component Type: 23.40.20.14.14.11 Chairs
Orientation: ViewCube

Features

The following table lists all features in the sequence of the Model browser:

+/- Name Type Status
[ ]
Extrusion12 Extrude Success
[ ] Extrusion11 Extrude Success
[ ] Extrusion10 Extrude Success
[ ] Extrusion9 Extrude Success
[ ] Extrusion8 Extrude Success

Connectors

Connectors and connector links included on publish:

+/- Name Type Status

Properties

The following table lists the converted properties:

+/- Name Status

Parameters

The following table lists the converted parameters:

[-] Inventor Parameters
+/- Name Expression Status
[ ] d17 961.056774876 mm Success
[ ] d19 53.75 mm Success
[ ] d21 466.469041948 mm Success
[ ] d23 466.469041948 mm Success
[ ] d25 1300.96461867 mm Success
[+] Auxiliary Parameters

And what it looks like in Revit.

model-from-Inventor-to-Revit Autodesk Revit Inventor  Workflow - Part 1

By |2017-05-24T12:12:47+00:00April 21st, 2015|

Share This Story, Choose Your Platform!

About the Author:

I am an Autodesk Application Engineer in the manufacturing space for a Gold Autodesk Reseller in South Africa called Micrographics. My role is to focus on support and training. My speciality is Inventor, Autodesk Vault and AutoCAD. Over the last 16 years in the Autodesk Channel I have also added AutoCAD Electrical, AutoCAD Mechanical, AutoCAD Plant and iLogic to my support and training portfolio. -Solutions Consultant/Engineer-